GE Telephone 29253 User Manual

REN Number  
Telephone Operation  
Model 29253  
On the bottom of this equipment is a label indicating, among other  
information, the Ringer Equivalence Number (REN) for the equipment.  
Redial  
This unit redials up to 32 digits. To automatically redial the last number  
you called:  
Series Trimline  
Phone User’s Guide  
The REN is useful in determining the number of devices you may connect  
to your telephone line and still have all of these devices ring when  
your telephone number is called. In most (but not all) areas, the sum  
of the RENs of all devices connected to one line should not exceed 5.  
To be certain of the number of devices you may connect to your line  
as determined by the REN, you should contact your local telephone  
company.  
1. Pick up the handset and wait for a dial tone.  
2. Press the redial button.  
Flash  
Press the flash button instead of the hook switch to activate custom  
calling services such as call waiting or call transfer. Custom calling  
services are provided by the phone company.  
REN Number is located on the cabinet bottom.  
Receiver Volume  
Licensing  
You may control the listening level with the volume switch on the bottom  
of the handset. It has 3 levels: lo, mid, and high.  
Licensed under US Patent 6,427,009.  
Hearing Aid Compatibility (HAC)  
Ringer Volume  
This telephone system meets FCC/Industry Canada standards for Hearing  
Aid Compatibility.  
You may control the ringer volume level with the switch located above the  
touch tone pad on the handset.  
= ringer tone will be loud  
= ringer tone will be low  
= telephone will not ring  
CAUTION:  
RISKOFELECTRICSHOCK  
DONOTOPEN  
THE EXCLAMATION  
POINT WITHIN THE  
TRIANGLE IS A  
THE LIGHTNING  
CAUTION: TO REDUCE THE  
FLASH AND ARROW RISK OF ELECTRIC SHOCK, DO  
HEAD WITHIN THE NOT REMOVE COVER (OR  
TRIANGLE IS A  
WARNING:TO  
WARNING SIGN  
ALERTING YOU OF  
IMPORTANT  
BACK). NO USER  
PREVENT FIRE OR  
ELECTRICAL SHOCK  
HAZARD, DO NOT  
EXPOSETHIS  
Troubleshooting Tips  
WARNING SIGN  
ALERTING YOU OF  
“DANGEROUS  
VOLTAGE” INSIDE  
THE PRODUCT.  
SERVICEABLE PARTS INSIDE.  
REFER SERVICING TO  
QUALIFIED SERVICE  
PERSONNEL.  
No dial tone.  
INSTRUCTIONS  
ACCOMPANYING  
THE PRODUCT.  
• Press and release the hook switch. Check the hook switch: Does it fully  
extend when the handset is lifted from the cradle?  
PRODUCT TO RAIN  
OR MOISTURE.  
SEE MARKING ON BOTTOM  
/
BACK OF PRODUCT  
Phone doesn’t ring.  
• Make sure RINGER switch (located on the handset) is set to loud or low.  
Introduction  
• Are you using too many phones on one line? (The total REN of all  
phones on the same line should not be greater than the maximum  
REN for your calling area. See Equipment Approval Information).  
Other party cannot hear you.  
• Make sure phone cord is securely plugged in.  
• Make sure extension phones are on the hook at the same time you’re  
using the phone. It is normal for the volume to drop when additional  
extension phones are used at the same time.  
Phone “howls” when handset is placed near the base and handset volume  
level is too high.  
Your telephone is designed to give you flexibility in use and high quality  
performance. To get the most from your new telephone, we suggest that  
you take a few minutes right now to read through this instruction manual.  
CAUTION: When using telephone equipment, there  
are basic safety instructions that should always  
be followed. Refer to the IMPORTANT SAFETY  
INSTRUCTIONS provided with this product and save  
them for future reference.  
Important Information  
NOTE: This phone uses Touch-Tone dialing service only.  
For this telephone to function properly, you must use  
Touch-Tone service available through your local telephone  
company.  
NOTICE: This product meets the applicable Industry Canada technical  
• This is normal feedback due to handset volume level being set  
to maximum.  
specifications.  
Operation is subject to the following two conditions: (1) This device may  
not cause interference, and (2) This device must accept any interference,  
including interference that may cause undesired operation of the device.  
General Product Care  
Before You Begin  
To keep your telephone working and looking good, follow these guidelines:  
Wall plate  
Telephone Jack Requirements  
The equipment must be installed using an acceptable method of  
connection. The customer should be aware that compliance with the  
above conditions may not prevent degradation of service in some  
situations.  
• Avoid putting the phone near heating appliances and devices that  
generate electrical noise (for example, motors or fluorescent lamps).  
• DO NOT expose to direct sunlight or moisture.  
• Avoid dropping and other rough treatment to the phone.  
• Clean with a soft cloth.  
• Never use a strong cleaning agent or abrasive powder because this  
will damage the finish.  
• Retain the original packaging in case you need to ship the phone at a  
later date.  
To use this phone, you need an RJ11C (CA11A) type  
modular telephone jack, which might look like the  
one pictured here, installed in your home. If you don’t  
have a modular jack, call your local phone company  
to find out how to get one installed.  
Modular  
telephone  
line jack  
Repairs to certified equipment should be made by an authorized Canadian  
maintenance facility designated by the supplier. Any repairs or alterations  
made by the user to this equipment, or equipment malfunctions, may give  
the telecommunications company cause to request the user to disconnect  
the equipment.  
Important Installation Information  
• Never install telephone wiring during a lightning storm.  
• Never install telephone jacks in wet locations unless the jack is  
specifically designed for wet locations.  
• Never touch non-insulated telephone wires or terminals, unless the  
telephone line has been disconnected at the network interface.  
• Use caution when installing or modifying telephone lines.  
• Temporarily disconnect any equipment connected to the phone such  
as faxes, other phones, or modems.  
Users should ensure for their own protection that the electrical ground  
connections of the power utility, telephone lines and internal metallic  
water pipe systems, if present, are connected together. This precaution  
may be particularly important in rural areas.  
Service  
Thomson Digital Technologies Ltd., warrants to the purchaser or  
gift recipient that if any manufacturing defect becomes apparent  
in this product within 1 year from the original date of purchase, it  
will be replaced free of charge, including return transportation.  
CAUTION: Users should not attempt to make such connections themselves,  
but should contact the appropriate electric inspection authority, or  
electrician, as appropriate.  
This warranty does not include damage to the product resulting  
from accidents, misuse or leaking batteries.  
NOTES: This equipment may not be used on coin service provided by  
the telephone company.  
Handset Layout  
Should your product not perform properly during the warranty  
period, either:  
Ringer  
Interference Information  
flash  
volume  
switch  
(button)  
1. Return it to the selling dealer with proof of purchase for replace-  
ment,  
This equipment generates and uses radio frequency energy which may  
interfere with residential radio and television reception if not properly in-  
stalled and used in accordance with instructions contained in this manual.  
Reasonable protection against such interference is ensured, although  
there is no guarantee this will not occur in a given installation. If interfer-  
ence is suspected and verified by switching this equipment on and off, the  
user is encouraged to try to correct the interference by one or more of  
the following measures: Reorient the radio/television receiver’s antenna,  
relocate the equipment with respect to the receiver, plug the equipment  
and receiver into separate circuit outlets. The user may also wish to  
consult a qualified radio/television technician for additional suggestions.  
This equipment has been fully tested and complies with all limits for Class  
B computing devices pursuant to part 15 FCC Rules and Regulations.  
Operation is subject to the following two conditions: (1) This device may  
not cause interference, and (2) This device must accept any interference,  
including interference that may cause undesired operation of the device.  
OR  
redial  
1
flash  
redial  
2. Remove the batteries (where applicable), and pack product  
complete with accessories in the original carton (or equivalent).  
abc  
jkl  
def  
(button)  
2
8
3
ghi  
mno  
4
5
6
— Mail prepaid (with proof of purchase) and insured to:  
pqrs  
wxyz  
tuv  
7
9
Thomson Digital Technologies Ltd.  
c/o Thomson multimedia Ltd.  
6200 Edwards Boulevard  
Mississauga, Ontario  
tone  
oper  
#
0
*
VOL  
Receiver  
volume  
switch  
Canada L5T 2V7  
The provisions of this written warranty are in addition to and not a  
modification of or subtraction from the statutory warranties and  
other rights and remedies contained in any applicable legislation,  
and to the extent that any such provisions purport to disclaim,  
exclude or limit any such statutory warranties and other rights and  
remedies, such provisions shall be deemed to be amended to the  
extent necessary to comply therewith.  
Telephone Network Information  
Should your equipment cause trouble on your line which may harm the  
telephone network, the telephone company, where practicable, may notify  
you that temporary discontinuance of service may be required. Where  
prior notice is not practicable and the circumstances warrant such action,  
the telephone company may temporarily discontinue service immediately.  
If you are unable to find a qualified servicer for out of warranty  
service, you may write to:  
Thomson Digital Technologies Ltd.  
c/o Thomson Inc.  
P.O. Box 0944  
The telephone company may make changes in its communications  
facilities, equipment, operations or procedures where such action is  
required in the operation of its business. If these changes are expected  
to affect the use or performance of your telephone equipment, the  
telephone company will likely give you adequate notice to allow you to  
maintain uninterrupted service.  
Installing the Phone  
Your telephone should be placed on a level surface such as a desk or table  
top, or you can mount it on a wall. A desktop/wall mounting pedestal is  
built into the base of the phone.  
Indianapolis, Indiana, U.S.A., 46206-0944  
Attach your sales receipt to this booklet for future reference. This  
information is required if service is needed during the warranty  
period.  
1. Slide the RINGER volume switch (on the handset) to the desired volume.  
2. Set the receiver volume switch (on the handset) to the desired listening  
volume.  
3. Plug the telephone line cord into a modular wall phone jack.  
4. Feed the cord through the grooves as shown in the picture below.  
Notice must be given to the telephone company upon termination of your  
telephone from your line.  
PURCHASE DATE _________________________________________  
NAME OF STORE _________________________________________  
Wall Mount Installation  
Your telephone may also be mounted on a wall plate (not included).  
1. Plug the telephone line cord into a modular wall phone jack.  
2. Slip the mounting holes on the base over the wall plate posts and  
firmly slide the unit down  
into place (wall plate not  
included).  
NOTE: In desktop or  
wall mount mode, you  
Thomson Digital Technologies Ltd.  
© 2006 Thomson Digital Technologies Ltd.  
Trademark(s) ® Registered  
Model 29253  
16156460 (Rev. 3 CAN E/F)  
06-41  
may want to wrap  
the excess telephone  
line cord around the  
mounting bracket on the bottom of the base.  
Marque(s) déposée(s)  
Printed in China  
 

Eclipse Fujitsu Ten GPS Receiver AVN 6600 User Manual
EverFocus DVR ephd04 User Manual
Excalibur electronic Motorized Toy Car 8628 User Manual
FoodSaver Food Saver V240 User Manual
FoodSaver Food Saver V1085 User Manual
Fostex TV Cables VM200 User Manual
Garmin GPS Receiver 18X User Manual
Gemini CD Player CDJ 600 User Manual
Gianni Industries Door AMB 300 User Manual
Gianni Industries Door P UB UBK300 A User Manual